Wmec Wmec [snap-in] SM Series free download

File name Wmec [snap-in] SM Series.pdf

ALUMINUM ELECTROLYTIC CAPACITORS SM Snap-in terminal Type, Standard Series Applicable Standard Characteristic W of JIS C 5141 Operating Temperature Range -40~+85(6.3~250V.DC) -25~+85(315~450V.DC) Rated Working Voltage Range 6.3~450 V.DC Rated Voltage and Surge Voltage Rated Voltage (V) 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 Surge Voltage (V) 8 13 20 32 44 63 79 125 200 250 300 400 450 500 DC Leakage Current Applying the rated DC voltage to the capacitor. The leakage current is measured at 5 minutes after the DC voltage across the capacitor reached the rated voltage. The leakage current shall not exceed the value below. (at 25) I3CVA, I: Leakage Current (A) C: Nominal Capacitance (F) V: Rated Voltage (V) Capacitance Tolerance The capacitance shall be within the following tolerance to the nominal capacitance. -20%~+20% (At 25, 120Hz) Tangent of Loss Angle (Tan) Tan shall not exceed the value below. (At 25, 120Hz) When nominal capacitance is over 1000F. Tan shall be added 0.01 to the listed value with increase of every 1000F. Rated Voltage (V) 6.3 10 16,25 35 50,63 80,100 160~400 450 Tan 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.20 WANMING ELECTRONICS CO., LTD. PAGE: 4/9 ALUMINUM ELECTROLYTIC CAPACITORS Load Life The following specifications shall be satisfied when the capacitors are restored to 25 after the rated voltage is applied for 2000 hours at 85. Capacitance Change